Fritz Zyme Fishless FUEL 59ml

To bring aquarium to 2 ppm ammonia: Add 4 drops per One U.S. Gallon (3.78 L) or 1 tsp (5 ml) per 25 U.S. Gallons (94.6 L) DO NOT USE WHEN LIVESTOCK IS PRESENT.

Fritz Fishless Fuel Ammonia Solution is to be used when performing a fishless cycle. Add required amount of Fritz Fishless Fuel liquid ammonia solution to reach desired ammonia level (Fritz recommends 2-4 ppm). After adding ammonia add FritzZyme Nitrifying Bacteria and test daily. Once ammonia and nitrite levels are reading zero, livestock can be safely added. Continue to monitor ammonia and nitrite on a regular basis.

• Use along with nitrifying bacteria (FritzZyme or TurboStart) as a food source
• No equipment restrictions necessary
• Odor variations are normal; some lots may not have a discernable ammonia odor
• Contraindications: DO NOT add Ammonium Chloride to an aquarium with livestock present
• Overdosed? Perform small water changes if needed to dilute
• Test aquarium water with an ammonia test kit with a range up to at least 4 ppm
• NOTE: Be careful not to use too much ammonium chloride. Raising ammonia levels above 5.0ppm may actually slow the cycle time.